Search Your location/language Australia, English
SMART-CASE

Smart-Case

Contoured handheld enclosures – great to hold

The idea of giving greater expression to ergonomic requirements was the starting point in the development of our SMART-CASE plastic enclosures.

  • ergonomic design for maximum user comfort
  • ideal for remote control devices connected via cable or powered by batteries:  AAA, AA, 9 V or 12 V round cell
  • versions with pre-fitted cable glands (sizes M, L and XL)
  • recessed operating area for protecting the membrane keypad or decorative foil/label
  • ABS (UL 94 HB); SMART-CASES also available in infra-red light-permeable PMMA plexiglas
  • protection class up to IP 65: sizes L and XL with optional sealing kit and without battery compartment
  • suitable clip and support for secure deposit as accessories
  • station M, L & XL for desk-top applications
  • internal fastening pillars and fixing supports for PCBs and components
  • 4 enclosure sizes
  • Application Examples

Application fields

  • Many different types of remote control systems
  • Mobile USB solutions
  • Specially made for the medical and social fields as well as in the household and in industry
  • Select Versions
  • Accessories
  • Catalogue Documents
  • View Customising Options

Select which version/size you want and click "select".

 

With eyelet for key rings etc.

SMART-CASE with eyelet for key rings etc.

With battery compartment

SMART-CASE with battery compartment

Without battery compartment, with cable gland

SMART-CASE without battery compartment, with cable gland

Without battery compartment, without cable gland

SMART-CASE without battery compartment, without cable gland

A0304031 Self-tapping screws 2.2 x 5 mm (PZ1)

A0304031

Self-tapping screws 2.2 x 5 mm (PZ1) Self-tapping crosshead screw (PZ1), specifically suitable for plastics. For fastenings components, boards and PCBs onto pillars.
For correct assembly please note the tightening torque depends on enclosure type. View list (.xls) >>

Supply 1 self-tapping screw

Close

A0304031

Self-tapping screws 2.2 x 5 mm (PZ1)
A9100001 Ring eyelet

A9100001

Ring eyelet For universal use. For threading in hand straps and the like. Simple installation with locking hook. Inside ring diameter 2.5 mm, max. wall thickness 3 mm, location hole ø 4 mm required.

Supply 1 ring eyelet

Close

A9100001

Ring eyelet PA 6
volcano
A9100002 Ring eyelet

A9100002

Ring eyelet For universal use. For threading in hand straps and the like. Simple installation with locking hook. Inside ring diameter 2.5 mm, max. wall thickness 4 mm, location hole ø 5 mm required.

Supply 1 ring eyelet

Close

A9100002

Ring eyelet PA 6
volcano
A9160003 Plug-in contact, 1 x 9 V (PP3)

A9160003

Plug-in contact, 1 x 9 V (PP3) Version: Lateral cable exit. Cable length approx. 100 mm. Diameter of contacts = 5.7/5.3 mm.
Application: for a 9 V flat battery (PP3).

Supply 1 plug-in contact

Close

A9160003

Plug-in contact, 1 x 9 V (PP3)
A9164001 Key ring

A9164001

Key ring Version: diameter = 20.5 mm.

Supply 1 key ring

Close

A9164001

Key ring Steel
nickel-plated
20.5mm
A9166001 Set of battery clips, 2 x AAA

A9166001

Set of battery clips, 2 x AAA For contacting the batteries.

Supply 4 single contacts

Close

A9166001

Set of battery clips, 2 x AAA Steel
tin-plated
A9166002 Battery contact, 2 x AAA

A9166002

Battery contact, 2 x AAA In combination with battery contacts A9166001 it's possible to have a bridge connection and therefore a serial connection.

Supply 1 battery contact

Close

A9166002

Battery contact, 2 x AAA Steel
tin-plated
A9166003 Battery holder, 2 x AAA

A9166003

Battery holder, 2 x AAA The battery holder allows practically movement-free securing of the 2 x 1.5 V micro cells (AAA), thus ensuring that the internal power supply is securely located in position.

Supply 1 battery holder, 1 self-tapping screw

Close

A9166003

Battery holder, 2 x AAA PA 6 (UL 94 HB)
black RAL 9005
A9166004 Set of pull-relief

A9166004

Set of pull-relief For pull-relief of cable-connected applications. To be mounted onto the towers provided in the case or station.

Supply 2 preshaped pull-relief clamps, 2 self-tapping screws

Close

A9166004

Set of pull-relief PA 6
volcano
A9166005 Adhesive foil

A9166005

Adhesive foil For self-adhesive mounting of the holder. Double-sided adhesive foil with foam carrier.

Supply 1 piece

Close

A9166005

Adhesive foil
A9166037 Station M

A9166037

Station M Attractive and practical station for holding your SMART CASE M with internal power supply. Contact is made with contact pins and spring contacts so that you can charge your batteries automatically (separate article, holes necessary, preformed centring facility provided). Pillars for PCB mounting, and strain relief to the rear.

Supply Bottom and top part, rubber feet, assembly kit

Close

A9166037

Station M ABS (UL 94 HB)
off-white RAL 9002
A9166039 Station M

A9166039

Station M Attractive and practical station for holding your SMART CASE M with internal power supply. Contact is made with contact pins and spring contacts so that you can charge your batteries automatically (separate article, holes necessary, preformed centring facility provided). Pillars for PCB mounting, and strain relief to the rear.

Supply Bottom and top part, rubber feet, assembly kit

Close

A9166039

Station M ABS (UL 94 HB)
black RAL 9005
A9166307 Holder M

A9166307

Holder M Special holder for SMART-CASE M for safe storing of cable-connected or wireless remote controls. Fixing at the wall or other surfaces by commercial screws with head diameter 5.3 - 8.2 mm. The contour in the rear facilitates receiving also SMART-CASE M with clip.

Supply 1 holder

Close

A9166307

Holder M ABS (UL 94 HB)
off-white RAL 9002
A9166309 Holder M

A9166309

Holder M Special holder for SMART-CASE M for safe storing of cable-connected or wireless remote controls. Fixing at the wall or other surfaces by commercial screws with head diameter 5.3 - 8.2 mm. The contour in the rear facilitates receiving also SMART-CASE M with clip.

Supply 1 holder

Close

A9166309

Holder M ABS (UL 94 HB)
black RAL 9005
A9166327 Holder M, with adapter

A9166327

Holder M, with adapter Special holder with adapter for SMART-CASE M for fixing at 4-claws-system-holders (separate articles A9220029, A9220039, A9220049, A9220059). Holder screw-fixed with adapter.

Supply 1 holder, 1 adapter, assembly kit

Close

A9166327

Holder M, with adapter ABS (UL 94 HB)
off-white RAL 9002
A9166329 Holder M, with adapter

A9166329

Holder M, with adapter Special holder with adapter for SMART-CASE M for fixing at 4-claws-system-holders (separate articles A9220029, A9220039, A9220049, A9220059). Holder screw-fixed with adapter.

Supply 1 holder, 1 adapter, assembly kit

Close

A9166329

Holder M, with adapter ABS (UL 94 HB)
black RAL 9005
A9167002 Sealing L

A9167002

Sealing L Application: for a higher protection class. For versions II - V.

Supply 1 Sealing kit

Close

A9167002

Sealing L
A9167005 Adhesive foil

A9167005

Adhesive foil For self-adhesive mounting of the holder. Double-sided adhesive foil with foam carrier.

Supply 1 piece

Close

A9167005

Adhesive foil
A9167017 Belt/pocket clip

A9167017

Belt/pocket clip Design: Special clip for SMART-CASE M, L and XL. For fixing the preshaped centres in the bottom part have to be milled or punched.

Supply 1 Clip, assembly kit

Close

A9167017

Belt/pocket clip PA 6 (UL 94 HB)
off-white RAL 9002
A9167019 Belt/pocket clip

A9167019

Belt/pocket clip Design: Special clip for SMART-CASE M, L and XL. For fixing the preshaped centres in the bottom part have to be milled or punched.

Supply 1 Clip, assembly kit

Close

A9167019

Belt/pocket clip PA 6 (UL 94 HB)
black RAL 9005
A9167027 Holding clamp

A9167027

Holding clamp Special holding clamp for attaching to tubes up to Ø 32 mm and corresponding suspensions. For fixing the preshaped centres in the bottom part have to be milled or punched.

Supply 1 holding clamp, assembly kit

Close

A9167027

Holding clamp PA 6 (UL 94 HB)
off-white RAL 9002
A9167029 Holding clamp

A9167029

Holding clamp Special holding clamp for attaching to tubes up to Ø 32 mm and corresponding suspensions. For fixing the preshaped centres in the bottom part have to be milled or punched.

Supply 1 holding clamp, assembly kit

Close

A9167029

Holding clamp PA 6 (UL 94 HB)
black RAL 9005
A9167037 Station L

A9167037

Station L Attractive and practical station for holding your SMART CASE L with internal power supply. Contact is made with contact pins and spring contacts so that you can charge your batteries automatically (separate article, holes necessary, preformed centring facility provided). Pillars for PCB mounting, and strain relief to the rear.

Supply Bottom and top part, rubber feet, assembly kit

Close

A9167037

Station L ABS (UL 94 HB)
off-white RAL 9002
A9167039 Station L

A9167039

Station L Attractive and practical station for holding your SMART CASE L with internal power supply. Contact is made with contact pins and spring contacts so that you can charge your batteries automatically (separate article, holes necessary, preformed centring facility provided). Pillars for PCB mounting, and strain relief to the rear.

Supply Bottom and top part, rubber feet, assembly kit

Close

A9167039

Station L ABS (UL 94 HB)
black RAL 9005
A9167307 Holder L

A9167307

Holder L Special holder for SMART-CASE L for safe storing of cable-connected or wireless remote controls. Fixing at the wall or other surfaces by commercial screws with head diameter 5.3 - 8.2 mm. The contour in the rear facilitates receiving also SMART-CASE L with clip.

Supply 1 holder

Close

A9167307

Holder L ABS (UL 94 HB)
off-white RAL 9002
A9167309 Holder L

A9167309

Holder L Special holder for SMART-CASE L for safe storing of cable-connected or wireless remote controls. Fixing at the wall or other surfaces by commercial screws with head diameter 5.3 - 8.2 mm. The contour in the rear facilitates receiving also SMART-CASE L with clip.

Supply 1 holder

Close

A9167309

Holder L ABS (UL 94 HB)
black RAL 9005
A9167327 Holder L, with adapter

A9167327

Holder L, with adapter Special holder with adapter for SMART-CASE L for fixing at 4-claws-system-holders (separate articles A9220029, A9220039, A9220049, A9220059). Holder screw-fixed with adapter.

Supply 1 holder, 1 adapter, assembly kit

Close

A9167327

Holder L, with adapter ABS (UL 94 HB)
off-white RAL 9002
A9167329 Holder L, with adapter

A9167329

Holder L, with adapter Special holder with adapter for SMART-CASE L for fixing at 4-claws-system-holders (separate articles A9220029, A9220039, A9220049, A9220059). Holder screw-fixed with adapter.

Supply 1 holder, 1 adapter, assembly kit

Close

A9167329

Holder L, with adapter ABS (UL 94 HB)
black RAL 9005
A9168002 Sealing XL

A9168002

Sealing XL Application: For a higher protection class. For the versions II - V.

Supply 1 sealing

Close

A9168002

Sealing XL
A9168005 Adhesive foil

A9168005

Adhesive foil For self-adhesive mounting of the holder. Double-sided adhesive foil with foam carrier.

Supply 1 piece

Close

A9168005

Adhesive foil
A9168037 Station XL

A9168037

Station XL Attractive and practical station for holding your SMART CASE XL with internal power supply. Contact is made with contact pins and spring contacts so that you can charge your batteries automatically (separate article, holes necessary, preformed centring facility provided). Pillars for PCB mounting, and strain relief to the rear.

Supply Bottom and top part, rubber feet, assembly kit

Close

A9168037

Station XL ABS (UL 94 HB)
off-white RAL 9002
A9168039 Station XL

A9168039

Station XL Attractive and practical station for holding your SMART CASE XL with internal power supply. Contact is made with contact pins and spring contacts so that you can charge your batteries automatically (separate article, holes necessary, preformed centring facility provided). Pillars for PCB mounting, and strain relief to the rear.

Supply Bottom and top part, rubber feet, assembly kit

Close

A9168039

Station XL ABS (UL 94 HB)
black RAL 9005
A9168307 Holder XL

A9168307

Holder XL Special holder for SMART-CASE XL for safe storing of cable-connected or wireless remote controls. Fixing at the wall or other surfaces by commercial screws with head diameter 5.3 - 8.2 mm.

Supply 1 holder

Close

A9168307

Holder XL ABS (UL 94 HB)
off-white RAL 9002
A9168309 Holder XL

A9168309

Holder XL Special holder for SMART-CASE XL for safe storing of cable-connected or wireless remote controls. Fixing at the wall or other surfaces by commercial screws with head diameter 5.3 - 8.2 mm.

Supply 1 holder

Close

A9168309

Holder XL ABS (UL 94 HB)
black RAL 9005
A9168327 Holder XL, with adapter

A9168327

Holder XL, with adapter Special holder with adapter for SMART-CASE XL for fixing at 4-claws-system-holders (separate articles A9220029, A9220039, A9220049, A9220059). Holder screw-fixed with adapter.

Supply 1 holder, 1 adapter, assembly kit

Close

A9168327

Holder XL, with adapter ABS (UL 94 HB)
off-white RAL 9002
A9168329 Holder XL, with adapter

A9168329

Holder XL, with adapter Special holder with adapter for SMART-CASE XL for fixing at 4-claws-system-holders (separate articles A9220029, A9220039, A9220049, A9220059). Holder screw-fixed with adapter.

Supply 1 holder, 1 adapter, assembly kit

Close

A9168329

Holder XL, with adapter ABS (UL 94 HB)
black RAL 9005
A9190002 Set of battery clips, 2xN/2xAA/2xAAA

A9190002

Set of battery clips, 2xN/2xAA/2xAAA For contacting the batteries.
Note application ART-CASE: only for base suitable (2 x AA).

Supply 1 double contact, 2 single contacts

Close

A9190002

Set of battery clips, 2xN/2xAA/2xAAA Steel
tin-plated
A9190003 Set of battery clips, 2xN/2xAA/2xAAA

A9190003

Set of battery clips, 2xN/2xAA/2xAAA For contacting the batteries.

Supply 1 double contact, 2 single contacts

Close

A9190003

Set of battery clips, 2xN/2xAA/2xAAA Steel
nickel-plated
A9193030 Contact pin

A9193030

Contact pin Contact pin, round with flat flange for transmitting charging current. Stepped bore necessary, then self-locking. Further contact established by means of a soldered stranded wire in the internal drilled hole. Load-carrying capacity up to 15 A. Extremely low contact resistance.

Supply 1 contact pin

Close

A9193030

Contact pin gold-plated
A9193032 Spring contact

A9193032

Spring contact Spring contact, round with ballpoint tip and collar for transmitting charging current. Drilled hole necessary, then self-locking. Further contact established by means of a soldered stranded wire on the fixed outer surface or PCB mounting. Load-carrying capacity up to 3 A. 1.5 mm stroke, 0,3 N. Extremely low contact resistance.

Supply 1 spring contact

Close

A9193032

Spring contact
A9220029 Holding device, ball joint

A9220029

Holding device, ball joint For self-adhesive mounting or screw mounting. The base can be moved horizontally backwards and forwards by 45° and can be rotated around its own axis. The optimum setting can be fixed with the integrated locking screw. Adapter for holding device (4-claws system) required as a separate article for securing the device.

Supply 1 holding device, mounting material

Close

A9220029

Holding device, ball joint ABS (UL 94 HB)
black
30x54x75mm
A9220039 Holding device, bicycle

A9220039

Holding device, bicycle For screw mounting on the bar with ø 20 to 25 mm. With two rubber shims for correct mounting on the bar or handlebars. Adapter for holding device (4-claws system) required as a separate article for securing the device.

Supply 1 holding device, 2 rubber shims, 1 allen key

Close

A9220039

Holding device, bicycle PC
black
38x57x42mm
A9220049 Holding device, flexible swan neck with suction pad

A9220049

Holding device, flexible swan neck with suction pad The device can be rotated by 360° and can be adjusted horizontally and vertically with an inclination angle of 40° in the viewing angle. With especially sturdy 8 mm aluminium wire – guarantees significantly reduced vibration characteristics and allows higher weight-carrying capacity. The diameter of the suction disk is 70 mm. Adapter for holding device (4-claws system) required as a separate article for securing the device.

Supply 1 holding device

Close

A9220049

Holding device, flexible swan neck with suction pad black
190x70x70mm
A9220059 Holding device, secured with suction pad

A9220059

Holding device, secured with suction pad Grid plate with rear-mounted grid arm and integrated suction disk with 70 mm diameter. Secure mounting on all smooth surfaces. Integrated spring mechanism and novel vacuum return path guarantee that the suction disk is absolutely flat before mounting. The position can be fixed using locking screws. Adapter for holding device (4-claws system) required as a separate article for securing the device.

Supply 1 holding device

Close

A9220059

Holding device, secured with suction pad black
133x70x70mm
B9100043 Hand strap, woven

B9100043

Hand strap, woven Without quick-action lock.

Supply 1 hand strap

Close

B9100043

Hand strap, woven black
200mm
B9100063 Carrying strap, textile

B9100063

Carrying strap, textile Without quick-action lock.

Supply 1 carrying strap

Close

B9100063

Carrying strap, textile black
860mm

Customising options for Smart-Case

What do you still need for your own very personal product? We can supply enclosures and tuning knobs with all necessary modifications for fitting your electronic components.